call us :+86-020-82853838/82858313 /

Email :sihaiaerosol@gmail.com
Aerosol Products
Home /

Aerosol Products

/Aerosol Tin Can Components Introduction
Aerosol Tin Can Components Introduction 2019 / 05 / 24

Aerosol Tin Can Components--Cone & Dome


There are three common types for aerosol tin can, 1-piece, 2-piece and 3-piecemetal tin aerosolcans, our Guangdong Sihai is manufacturing the 3-piece aerosol tin can.


An aerosol tin can is madeby printed tinplate sheet (can body) combined with cone and dome.


tinplate cone and dome aerosol can lids


Sihai also offer a wide range of aerosol cone and dome of all sizes, to provide best solutions for customers to meet their requirements.


We now have 21 full-automatic numerical control product lines for cone and dome to produce above 300 million pieces annually.



Aerosol Can Components

Size(mm)

Cone Code

Dome Code

Inner Coating

Pressure

Φ45

185

190

Normal/High

Φ52

195

200

Normal/High

Φ57

201

203

/

Normal

Φ60 Neck-in

205

206

/

Normal/High

Φ60 Straight-wall

207.5B

208

/

Normal

Φ65 Neck-in

207.5A

209

Normal/High

Φ65 Neck-in

207.5B

209

Normal/High

Φ65 Neck-in

207.5C

209


Normal/High

Φ65 Straight-wall

211

211

/

Normal

Φ70

211

213

/

Normal/High


We have clear lacquer, golden lacquer and white coating for the surface ofaerosol can cone and dome.


For inner golden lacquer, it can be applied for the cans diameter 45/52/ 65mm, such as personal care products--deodorant, air freshener, shaving foam...


Different pressure for your choose, normal pressur eand high pressure cone and dome


aerosol tin can components


Normal pressure: diameter 45/52/57/60/65/70mm

Deform pressure:≥1.2Mpa

Burst pressure:≥1.4Mpa


Use for car care products, butane gas, air freshener, shaving foam, insecticide, hair spray, spray paint...


High pressure: diameter 45/52/60/65/70mm

Deform pressure:≥1.8Mpa

Burst pressure:≥2.0Mpa


Use for refrigerant, dust remover...


What’s more, we can do custom logo printing for the cone, and blind mark on the dome.


All products are manufactured in accordance with GB13042-2008 standards and managed according to ISO19001:2015 quality system. We have high standard material selection, top-ranking equipment and strict procedure control to make high quality products for you.


Copyright © 2019 Guangdong Sihai Iron-Printing and Tin-Making Co.,Ltd..All Rights Reserved. Powered by dyyseo.com

back to top

Home

Products

About us

Contact us