Aerosol spray is a type of dispensing system which creates an aerosol mist of liquid particles. It is used with a can or bottle that contains a payload and propellant under pressure. When the container's valve is opened, the payload is forced out of a small hole and emerges as an aerosol or mist. As propellant expands to drive out the payload, only some propellant evaporates inside the can to maintain a constant pressure. Outside the can, the droplets of propellant evaporate rapidly, leaving the payload suspended as very fine particles or droplets.
The safety of the aerosol can depends on the material used, the thickness of the can body and the thickness of the top and bottom cover, and the craftsmanship during production. The top and bottom cone serve as a guarantee for the pressure of aerosol cans. If we need make more tricks on the top and bottom cones, the technology required is higher than normal ones. Now, we, Guangdong Sihai, can do six sizes aerosol top and bottom cones and different colors.
|
Diameter(mm) |
Type |
Pressure |
Height(mm) |
Printing |
|
45mm |
Necked-in |
Normal Pressure |
85-185 |
4 colors & Inner coating |
|
45mm |
Necked-in |
High Pressure |
85-185 |
4 colors & Inner coating |
|
52mm |
Necked-in |
Normal Pressure |
100-240 |
4 colors & Inner coating |
|
52mm |
Necked-in |
High Pressure |
100-240 |
4 colors & Inner coating |
|
57mm |
Necked-in |
Normal Pressure |
100-240 |
4 colors |
|
60mm |
Necked-in |
Normal Pressure |
100-210 |
4 colors |
|
60mm |
Straight-Wall |
Normal Pressure |
150-240 |
4 colors |
|
65mm |
Necked-in |
Normal Pressure |
100-300 |
4 colors & Inner coating |
|
65mm |
Necked-in |
High Pressure |
100-300 |
4 colors & Inner coating |
|
65mm |
Straight-Wall |
Normal Pressure |
100-240 |
4 colors |
|
70mm |
Necked-in |
Normal Pressure |
100-240 |
4 colors |
